Replace the Length of Your LED Strip Lights

One of many advantages of using LED Strip Lights is they offer an user almost unparalleled versatility in terms of their application and functionality. One area in which they fulfill this is customization.

Unlike traditional kinds of effects lighting which comprise a single glass cylinder, LED Strip Lights contain a single strip of flexible circuit board. This circuit board is highly durable and can withstand high examples of tension before breaking. In addition to this additionally it is soft enough to be cut.

For a lot of customers it is actually easier to think of BROUGHT Strips as a form of luminous strapping, as this is in fact what they are. One upon side they feature a row of evenly space LEDs, or SMDs, depending on how technologically savvy you might be, and on the other there is a high glue sticky-back coating.

As such LED Strip Lighting can be cut to varying different lengths, depending on the demands and constraints of the project in question. There are two ways of cutting your strips; either send your measurements to the dealer and have them prepare it for the in advance, or, alternatively, do it yourself.

Irrespective of which you choose you will first have to measure the length of furniture, wall or even window into which you plan to set up the strip lights. A measurment in millimeters (mm) is more pereferable as it allows a retailer to help make the cuts with more exactitude.

The easiest way to cut your strips is of course to obtain in contact with your retailer and ask them to prepare your strips beforehand. They will do all the requisite cutting and soldering before they send them in order to you and can even advise you on what the best strip light and periphery ‘setup’ for your project.

Alternatively, you can employ the expertise of a professional electrician to do exactly the same. This is however a little more expensive because they will probably charge you at the standard by the hour rate, but , if you are already utilizing an electrician to do the installation so you want to oversee everything and make sure it is perfect then there is no damage in taking this route. Your own electrician should be able to cut and solder where necessary.

Finally, you can also the actual necessary cutting yourself. If you have purchased a single LED Strip, you will notice that there is a wired connection at one end, but not at the other. The reason for this is that an LED Stip Light is already a closed circuit and does not have to return to its point of origin in order to function. Therefore you can reduce through the strip light at any point and it will continue to work.

All LED Strip Lighting should feature easily recognizable ‘cutting points’ spaced periodically along their length. This is where you should cut if you intend to do it yourself using a sharp blade or pair of scissors. If you do discover you need to do any soldering you will also look for a series of solder points (2 intended for single colour LED Strip Lights plus 4 for RGB LED Strip Lights) to which your 2-core or 4-core cable can be attached.
When you have almost any questions relating to where by along with the way to use LED tape, you possibly can call us with our own web-page.
However , you need to only attempt this soldering your self if you have experience.